Electrical design and control panels
Schematics, I/O lists and PLC control panels, designed, assembled, wired and tested for your machine or process.
- PLC · HMI · SCADA · VFD
Automation services, from design to start-up
We deliver the electrical and control side of machines and process lines: design, panels, programming, testing, commissioning and support.
PLC and HMI programming
Clear, commented PLC logic and HMI screens for Siemens, Schneider Electric, Delta, LS Electric and Wecon, in Arabic, English or both.
Machine automation, drives and motion
Complete control systems for filling, labeling, printing, washing and test machines: PLC, HMI, VFDs, stepper and motion control.
Machine retrofits and control upgrades
Keep a good machine and replace its old controls: new PLC, HMI, drives and motion control, documented and tested, with a planned changeover.
Process control: temperature, pressure, CIP and batching
Control of pasteurization, sterilization, cooking, coating, CIP, batching and dosing, with recipes, interlocks and data logging.
SCADA, monitoring and data logging
SCADA screens, alarms, recipes, reports and traceability, so you can see the process and show what was produced.
Testing and commissioning
I/O and loop checks, interlock tests, start-up and tuning, for systems we build and for machines and lines supplied by others.
Troubleshooting, maintenance and support
Breakdown troubleshooting, program changes, preventive maintenance, operator training and help sourcing spare parts in Egypt.
Projects
Recent work
Real machines and real photos from our projects. Client names are withheld.
Food and beverage2026
Syrup jet mixing system on Siemens S7-1200 and SIMATIC HMI
- Siemens S7-1200 PLC
- Siemens S7-1200 I/O modules
How automation works
The control loop behind every machine
Sensors measure, the PLC decides, the HMI keeps people in the loop and the actuators act. Then it starts again, many times a second.
Sensor
Measures the process: temperature, pressure, level, flow or position.PT100 · 4–20 mAPLC
Compares the value with the setpoint and runs the logic: PID, interlocks, sequences.PID · 10 ms scan timeHMI / SCADA
Shows operators live values, alarms and trends, and passes their commands to the PLC.Modbus TCPActuator
A VFD, control valve or contactor applies the PLC's output to the machine.VFD 0–50 HzProcess
The machine responds, and the sensor measures the new value.72.4 °C
Signal types shown are typical examples.
Scope options
Ways to work with us
Complete control system
Design, panel, PLC and HMI programs, testing and commissioning, delivered by one team.
Programming or engineering only
You build the panel or the machine. We write the program, design the screens or produce the drawings.
Commissioning only
For equipment supplied by others: instrument and I/O checks, logic tests, start-up and punch-list closure.
Support after start-up
Troubleshooting, program changes, preventive maintenance and training, on terms agreed in writing.
From survey to handover
How we work
Six steps from the first visit to a running machine. You talk to the same engineers throughout.
Step 1: Site visit and survey
We see the machine or line, read the nameplates and drawings, and agree what the system must do.
Step 2: Proposal and design
You receive a written scope and quote. Once agreed, we produce the schematics, I/O list and bill of materials.
Step 3: Build and program
We assemble and wire the control panel, write the PLC program and design the HMI screens.
Step 4: Test before site
Wiring checks, I/O simulation and an HMI walk-through before anything reaches your floor.
Step 5: Commission on site
I/O and loop checks, interlock tests, start-up and tuning with your operators.
Step 6: Hand over and support
As-built drawings, operator training and follow-up support when you need changes.
Frequently asked questions
Common questions about our services
Do you work only on systems you built?
No. We also program, commission, upgrade and support machines built by others, after we review the program and documents or survey the machine.
Do you do the mechanical work on machines?
No. We handle the electrical and control side: panels, drives, sensors, PLC, HMI and SCADA. We work alongside your mechanical team or the machine builder.
Will we receive the program files and drawings?
Drawings are part of every delivery. Program files, passwords and ownership are written into the quote, so you know before you order what you will receive.
Why do two quotes for the same machine differ?
Usually because they do not cover the same scope. Compare what each quote includes: panel components and brands, how much programming and testing, drawings and program files, commissioning on site and support after start-up. Send us the other quote or a short description, and we will tell you what ours covers.
Do you hold certifications such as UL or CE?
No. We design following IEC 60204-1 and IEC 61439 practice, and we document our work. We do not issue UL listing or CE marking.
Tell us about your machine or line
Send a short description and a few photos. An engineer will review it and reply with questions or a quote.