Factories and machine builders in Egypt
New machines, upgrades of old ones, breakdowns and process improvements. Engineers who speak your language and come to your site.
- Industrial automation engineers in 6th of October City, Egypt
- Automation engineers · 6th of October City
Control panels, PLC programming and machine automation for factories in Egypt
We design the control system, program the PLC, HMI and SCADA, and commission the machine on your floor. For food, dairy, pharma, cosmetics and packaging lines.
- projects delivered
- 50+
- case studies
- 15
- years of team experience
- 4+
- industries served
- 7+
Platforms we program and integrate
We choose the platform that fits your machine, your budget and the spare parts you can get in Egypt.
See technologiesBrand names and logos belong to their owners. They are shown only to identify the hardware our engineers work with.
Who we work with
Setting up a factory in Egypt?
A local engineering team to commission imported lines, put HMI screens in Arabic for your operators and support the plant after start-up.
01Featured projects
Recent work
Real machines and real photos from our projects. Client names are withheld.
Pharmaceutical2025
Tablet coating machine on Siemens S7-1200 and WinCC
- Siemens S7-1200 PLC
- Siemens WinCC Professional SCADA
Food and beverage2026
Syrup jet mixing system on Siemens S7-1200 and SIMATIC HMI
- Siemens S7-1200 PLC
- Siemens S7-1200 I/O modules
Client names are withheld for confidentiality. References can be arranged on request, with the client's permission.
02Services
What we do
Eight services, from electrical design and panels to commissioning and support. Take the full scope or only the part you need.
Control panels
Schematics, I/O lists and PLC control panels, designed, assembled, wired and tested for your machine or process.
PLC and HMI programming
Clear, commented PLC logic and HMI screens for Siemens, Schneider Electric, Delta, LS Electric and Wecon, in Arabic, English or both.
Machine automation
Complete control systems for filling, labeling, printing, washing and test machines: PLC, HMI, VFDs, stepper and motion control.
Machine retrofits
Keep a good machine and replace its old controls: new PLC, HMI, drives and motion control, documented and tested, with a planned changeover.
Process control
Control of pasteurization, sterilization, cooking, coating, CIP, batching and dosing, with recipes, interlocks and data logging.
SCADA and data logging
SCADA screens, alarms, recipes, reports and traceability, so you can see the process and show what was produced.
Testing and commissioning
I/O and loop checks, interlock tests, start-up and tuning, for systems we build and for machines and lines supplied by others.
Maintenance and support
Breakdown troubleshooting, program changes, preventive maintenance, operator training and help sourcing spare parts in Egypt.
03Industries
Industries we serve
Most of our work is in plants where temperature, time, dose or position decides product quality.
Food and beverage
Pharmaceutical
Cosmetics
Packaging and labeling
Building materials
Commercial laundry
Test equipment
Other industry
04Why choose us
Why plants work with us
One team, design to start-up
The engineer who designs your control system also programs it and commissions it. Nothing is lost between teams.
Five platforms, no brand bias
Siemens, Schneider Electric, Delta, LS Electric and Wecon. We recommend the platform that fits your budget, your spare parts and your maintenance team.
Screens your operators understand
HMI screens in Arabic, English or both, with clear alarms, manual and automatic modes, and recipes operators can select.
Tested and documented
Every I/O point, interlock and alarm is checked before production. You receive drawings and notes your maintenance team can use.
Who you will work with
Engineers, not resellers
You talk directly to the automation engineers who work on your system, not to a sales middleman. Our team has more than four years of experience designing, programming and commissioning PLC, HMI and SCADA systems for food and beverage, pharmaceutical and other plants.
About us05From survey to handover
How we work
Six steps from the first visit to a running machine. You talk to the same engineers throughout.
Step 1: Site visit and survey
We see the machine or line, read the nameplates and drawings, and agree what the system must do.
Step 2: Proposal and design
You receive a written scope and quote. Once agreed, we produce the schematics, I/O list and bill of materials.
Step 3: Build and program
We assemble and wire the control panel, write the PLC program and design the HMI screens.
Step 4: Test before site
Wiring checks, I/O simulation and an HMI walk-through before anything reaches your floor.
Step 5: Commission on site
I/O and loop checks, interlock tests, start-up and tuning with your operators.
Step 6: Hand over and support
As-built drawings, operator training and follow-up support when you need changes.
Testing and commissioning
A local engineering team for your new plant
We commission imported lines, run I/O and loop checks, build Arabic HMIs for local operators and support the plant after start-up.
Food and beverage manufacturer · 2026
Waste treatment system commissioning
- Commissioning-only scope
- Every I/O signal tested
- Gradual start-up under real conditions
06Location
Where we work
We are based in 6th of October City, Giza. We work across Greater Cairo and Egypt's industrial zones, including:
Greater CairoGreater Cairo. About 60 km from our base (straight line)Greater Cairo. About 75 km from our base (straight line)Nile Delta. About 90 km from our base (straight line)Nile Delta. About 60 km from our base (straight line)About 160 km from our base (straight line)Suez Canal Economic Zone. About 140 km from our base (straight line)Suez Canal Economic Zone. About 160 km from our base (straight line)Suez Canal Economic Zone. About 200 km from our base (straight line)
Our base: 6th of October and New October
6th of October and New October
10th of Ramadan City
About 90 km from our base (straight line)
Plan a project in 10th of RamadanRequest a quoteBorg El Arab and New Borg El Arab
About 160 km from our base (straight line)
Plan a project in Borg El ArabRequest a quoteAin Sokhna, including the TEDA zone
About 140 km from our base (straight line)
Plan a project in Ain SokhnaRequest a quoteEast Port Said
About 200 km from our base (straight line)
Plan a project in East Port SaidRequest a quoteGreater Cairo
About 60 km from our base (straight line)
Plan a project in Obour CityRequest a quoteAbout 75 km from our base (straight line)
Plan a project in Badr CityRequest a quote
Nile Delta
About 90 km from our base (straight line)
Plan a project in 10th of RamadanRequest a quoteAbout 60 km from our base (straight line)
Plan a project in Sadat CityRequest a quote
Alexandria
About 160 km from our base (straight line)
Plan a project in Borg El ArabRequest a quote
Suez Canal Economic Zone
About 140 km from our base (straight line)
Plan a project in Ain SokhnaRequest a quoteAbout 160 km from our base (straight line)
Plan a project in Qantara WestRequest a quoteAbout 200 km from our base (straight line)
Plan a project in East Port SaidRequest a quote
Plant somewhere else in Egypt? Ask us. We plan site visits case by case.
07Frequently asked questions
Questions plant managers ask
Which PLC brands do you work with?
We program and integrate Siemens, Schneider Electric, Delta, LS Electric and Wecon. We also commission and support machines that arrive with other controllers, after we review their documentation.
Do you build the control panel as well?
Yes. We produce the electrical design, assemble and wire the panel, and test it with the PLC program before it goes to site.
Can you work on a machine that has no drawings or program?
Yes. We trace the wiring, document the inputs and outputs, and write a new program if the old one cannot be used.
Can the HMI screens be in Arabic?
Yes. We design HMI screens in Arabic, English or both. One of our shampoo filling machines runs on Arabic screens for its local operators.
Do you work outside Greater Cairo?
Yes. We are based in 6th of October City and work across Egypt's industrial zones, including 10th of Ramadan, Sadat City, Borg El Arab and the Suez Canal Economic Zone.
What does the price of a control system depend on?
On the number of inputs and outputs, the PLC and HMI platform, the panel size and components, how much programming and testing is needed, and where the site is. Send a short description and photos, and an engineer replies with questions, a site visit or a quote.
How do I get a quote?
Use the quote form or send us a WhatsApp message with a short description and photos of the machine, the panel and the nameplates. An engineer will reply with questions, a site visit or a quote.
Tell us about your machine or line
Send a short description and a few photos. An engineer will review it and reply with questions or a quote.
What we need to quote
You do not need everything on this list. Send what you have and we will ask for the rest.
- What the machine or line does, and what you want to change
- Photos of the machine, the existing panel and the nameplates of the motors, drives and PLC
- Drawings, an I/O list or the existing program, if you have them
- Preferred PLC and HMI brand, or no preference
- Supply voltage and frequency at the machine, for example 380 V, 50 Hz
- Plant location and target date
- Languages needed for the HMI screens and documents